Models
|
G48-305
|
G48-315
|
G48-325
|
G48-306
|
Display
|
LCD display with backlight ; Digit Size : 10mm x 5mm
|
No. of Digits
|
6
|
No.of Digits Setting key
|
6
|
Preset Level
|
1
|
2
|
1 Level preset + prewarn
|
1
|
Setting Range
|
-99999?999999
|
Prewarn Feature
|
-
|
0?999999
|
-
|
Input Mode
|
Contact / Open collector Voltage input (Selectable)
|
Input Signal
|
Open Collector (Sink current 10mA,DC power model: power supply volt / 1.2KW) L : 0?4V
Voltage (Input impedance 7KW) L : 0?4V H: 6?30V (Available to duplex wire DC sensor.
|
Count Speed
|
30Hz, 1kHz, 5kHz (selectable)
|
Count Mode
|
Add, Subtract,Add/Subtract (Add/Subtract individual input,Add/Subtract direction, 90° quadrature input)
|
Count Range
|
-99999?999999
|
Input Inhibition
|
Incoming pulses in either add or subtract mode can be inhibited at input B only.
|
Prescale
|
0.001?99.999 ( 0 setting is not available )
|
Decimal Point Position
|
0.0, 0.00, 0.000, No decimal point
|
Write
|
-99999?999999
|
Reset
|
Front panel reset, Remote reset,Auto-reset
|
Remote Reset Time
|
2msec or 20msec (selectable)
|
Reset Mode
|
Modes A, B,C,D, E, F,G can be selected.
Except for standard output,Mode A only is available for other output modes.
|
Memory
|
E2PROM (10 years, can be used 100,000 times)
|
Output
|
Relay output ( 1a ) : load of AC250V 5A / DC30V 5A maximum *for each output
|
Output Delay
|
30Hz : 20msec, 1kHz & 5kHz : 7msec.
|
Type of Output
|
1 Level Preset: Standard, Equal, Lower Limit,Upper Limit
2 Level Preset: Standard, Equal,Upper-Lower Limit,Upper-Upper Limit
1 Level Preset + Prewarn: Standard, Equal
|
Output Time
|
Standard output : one shot ( 10?9990msec ) or HOLD or HOLD 1 or HOLD 2
Equal,Upper, Lower output : Latched only when requirements are full
|
Key Lock
|
Key operation can be disabled at 4 protection levels (L1, L2, L3, L4) by selecting in Program Mode and shorting key lock terminals.
|
Error Display
|
In Add/subtract mode, error message will be displayed on the LCD if the count range is exceeded (overflow error : underflow error :)
|
Power Supply
|
AC100?240V
-15%, +10%
|
DC12?24V
-15%, +10%
|
Sensor Power Source
|
DC12V 100mA
|
-
|
Power Consumption
|
Approx. 7VA for AC240V
|
Approx. 1.2W for DC24V
|
Operating Temperature
|
-10?50°C (non-freezing) 45?85%RH (non-condensing)
|
Front Panel
|
IP54 (panel surface)
|
Weight
|
Approx. 170g
|
Approx. 110g
|